# Requirements

The following requirements are listed for using WORK & MOVE Coach:



## Operating systems

The following operating systems are supported, including both 32 and 64 bit versions:

* Windows 7 sp1, 8 and 10&#x20;
* Windows server 2008 r2 and higher

***

## .NET Framework

WORK & MOVE requires at least the full version of the .NET Framework (version 4.6.2) to be installed.

***

## LINAK powered Sit-Stand Desk

The sit-stand desk needs to be equipped with a supported LINAK control box. WORK & MOVE supports:&#x20;

* Control Box CBD 4 with S.W. P/N number 77432 and higher (cable type 1)&#x20;
* Control Box CBD 5 (cable type 1)&#x20;
* Control Box CBD 6 (cable type 1 or cable type 2)&#x20;

The number of the LINAK Control Box can be found on the sticker. See the example below where the number is marked with a red outline.

<div align="left"><figure><img src="https://1823372298-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FPHr4NNwyFWOO0w0FdmVr%2Fuploads%2FXnprkzK6mlVkCq5vLgz7%2Fimage.png?alt=media&#x26;token=42364d71-06ce-4368-807e-0400a1fcc515" alt=""><figcaption><p>Finding your LINAK Control Box version</p></figcaption></figure></div>

You also need an USB cable to connect your control box. WORK & MOVE supports the following cable types. Please check if the cable type is compatible with the control box:

* The LINAK USB2LIN Version 1.63 or higher.&#x20;
* The orange WORK & MOVE desk connector cable with firmware version 1.71 or higher.

{% embed url="https://www.bakkerelkhuizen.com/workmove-desk-connector/" %}

***

## LOGIDATA powered Sit-Stand desk

The sit-stand desk needs to be equipped with a supported LOGIClink controller. WORK & MOVE has experimental support for:&#x20;

* LOGICDATA LOGIClink Personal Lite connected with a USB cable.&#x20;
* LOGICDATA LOGIClink Personal Standard connected with a USB cable.&#x20;
* LOGICDATA LOGIClink Corporate connected with a USB cable.&#x20;

Please note the experimental logiclink support needs to be enabled in the desk settings screen. Please contact your LOGICDATA supplier to check if your control box and handset are compatible with LOGIClink.

{% embed url="https://www.logicdata.net/" %}
